Horizon BQ-270C+HT-30

Additional Machine Details:

automated professional perfect binder HORIZON BQ-270C of 2010 n°314015, size 320x320 cmm, to produce professional quality books with sharp, square spines, from the first book to last 10.4 inch color touchscreen produce books up to 50 mm thick at a maximum speed of 500 cycles per hour optional thickness caliper SI-270C n°308008 for true On Demand book production with different thickness for every book 1 carriage clamp automatically adjusted to the input book thickness milling section for the spine with rotary milling and roughening blades, adjustable milling depth from 0 to 3 mm glue tank with dual application rollers and side gluing rollers (adjustable amount of glue and glue length through the color touchscreen) nipping section suction cover feeder, cover scoring, cover registration delivery to a vertical stacker below the book loading station double and miss detection integrated 40 m3/h compressor book size : Max. 320 x 320 mm - Mini. 148 x 105 mm thickness from 2 sheets (1 mm) to 50 mm cover weight from 80g to 300g/M² cover size : Max. 320 mm x 660 mm - Mini. 135 mm x 230 mm cover pile height : max. 70 mm warm-up time : 60 min. production up to 5-max. 500 cycles/h. counter : 595952 books (on 26/04/16) SUPPLIED WITH : automatic three-knife trimmer HORIZON HT-30 de 2010 n°348007 with high capacity feed table (max. pile of 300 mm), icon-based touch-screen, accurate knife positioning and high quality trimming, high capacity stacker (300 mm max. pile height), rear sliding door for easy access The HT-30 is the one knife three-side trimmer for books-on-demand. The HT-30 features automated job setups and changeover to enable efficient just-in-time book production. Books are loaded into the in-feed hopper and then are taken into the machine automatically. The HT-30 can be connected to the Horizon perfect binder to form a true-books-on-demand system. The HT-30 trims three sides of a book with a single knife. A pressure clamp holds and rotates the books for sequential top, fore-edge and bottom trimming Precise servo motors are employed for knife positioning to ensure high quality trimming. The servo controlled hydraulic unit adjusts pressure automatically for mark-less trimming The trimming section, feed table and stacker are all interlocked and safety covered for maximum operator safety. The HT-30 can be connected to the Horizon perfect binder to form a true-books-on-demand system. major specifications: - Untrimmed book size : Max 320x235 mm - Min 204x136 mm - Trimmed book size : Max 305x230 mm - Min 200x134 mm - Trimmings width : Max 99,9 mm - Min 2,0 mm - Trim thickness : Max 51 mm - Book pile height : Max 300 mm - Clamp and pressure hydraulically operated/ automatic settings 3 steps 4 Kn/5,5 Kn/8 Kn/ manual settings 5 steps 1,5 kn/3 Kn/5 Kn/6,5 Kn/8 Kn - production speed : 400 books/h. (book thickness 25 mm, 2 piled books) - 500 books/h. (book thickness 10 mm, 5 piled books) - machine dimensions : 235x116x137 cm - machine weight : main body : 940 kg – transformer : 77 kg – accessory : 3 kg = 1.020 kg