Search Filter

Email alert for this search Create a free wanted advert

Search Results : 0

Category: Die Cutters - Automatic and Hand-Fed

Machine Specification: SP 1080E Year 1968 ; Max paper size 1080mm X 780MM , Min size 350 X 350mm; Max pressure 220 tonnes ; Speed 4,000 sph ; Substrates from 80 gsm up to 3mm . 3X Frames ; 4X steel plates ; 1 set stripi...

Category: Die Cutters - Automatic and Hand-Fed

Machine Specification: BOBST VisionCUT 1.6 age 2011 High quality flat-bed die-cutting for nano/micro flute to double-double corrugated board and litho-laminated With demand for die-cut corrugated products at an all time hi...

Category: Die Cutters - Automatic and Hand-Fed

Machine Specification: BOBST SP 102E-2 Year 1996 Max Size1020mm X 720mm Min size 400 X 350mm Max pressure 250 tonnes Speed 7,500 sph Substrates from 80 gsm to 2000 gsm Equipped with: 3X Frames ; 4X 5mm steel plates ...

Category: Die Cutters - Automatic and Hand-Fed

Machine Specification: BOBST 142E Speria Year 2005 Max size 1420 X 1020mm Min size 700 X 500mm Max press 600 tonnes Speed6,000 sph From 80gsm to 2000gsm Equipped with: 1 Frame ; 1X 5mm steel plate ; 1X 4mm stee...

Category: Die Cutters - Automatic and Hand-Fed

Machine Specification: Max sheet size : 1060×740 mm Min sheet size : 400×350 mm Paper Stock : 80 gsm – 2000 gsm C.U.B.E (Control Unit Bobst Electronic) Centerline System for Quick Change Over Manual Non-Stop Device Upper ...

Category: Die Cutters - Automatic and Hand-Fed

Machine Specification: Size 78 x 108 cm, with stripping unit, 2 plates, 2 chases, maximum speed: 4500 sheets per hour

Category: Die Cutters - Automatic and Hand-Fed

Machine Specification: 1995 Bobst 102 CER II

Category: Die Cutters - Automatic and Hand-Fed

Machine Specification: maximum sheet size – 800 x 1120 mm minimum sheet size – 380 x 450 mm maximum speed – 7,000 sph maximum cutting force – 300 ton Non-stop suction feeder. Left side pull register lay. 4 Front register l...

Category: Die Cutters - Automatic and Hand-Fed

Machine Specification: 31.5x44 inch Diecutter; Blanker, Autoplaten, 2 cutting chases, 4 cutting plates, 5 interchangeable frames for upper & lower stripping. $59,500 USD Ref. #85249-AB Graphtek Services, Inc. Graphtek@Use...

Category: Die Cutters - Automatic and Hand-Fed

Machine Specification: Stripping unit

Category: Die Cutters - Automatic and Hand-Fed

Machine Specification: Guillotine/Cutter<br />LOW HOURS STRIPING FULLY LOADED TWO CHASE TWO THIN PLATES

Category: Die Cutters - Automatic and Hand-Fed

Machine Specification: Hot foil stamping press Automatic feeder 2 x length foils pulls honeycomb chases Wasted foils rewind 12 heating zones 30.000 hours Excellent conditions

Category: Die Cutters - Automatic and Hand-Fed

Machine Specification: Die Cutter Autoplaten Bobst Spanthera 106 LER --Manual non-stop feeder --2 cutting chases (quick lock) --1 compensating plate for micrometric 4mm --Centerline --Micrometric fine adjustment device --...

Category: Die Cutters - Automatic and Hand-Fed

Machine Specification: Bobst Platen Press Autoplatine SP 1650E - 800T made in Swiss Year 1972 Max. paper size 1650 X 1158 Min Paper size 850 X 570 speed 4500 A.H.

Category: Die Cutters - Automatic and Hand-Fed

Machine Specification: Bobst SP 1260 E BM Hot Foil and Cutting Year: 1976 Max. Size: 92 x 126 cm Min. Size: 35x50 cm Max. Speed. 5000 S/H Pressure: 550 USA Tons 12 Heater Zones 4 Pulls Honeycomb, Cutting Chases available ...

Category: Die Cutters - Automatic and Hand-Fed

Machine Specification: BOBSET SP 130 ES 1994 NR. 057502702 48.600 WORKING HOURES MAX SIZE 130 X 92 CM MIN.SIZE 58 X 45 CM MAX SPEED 6500 C/H CENTER LINE, MILIMETR EDJMENENT, MULTU LOCK NON STOP IN DELIVERY 1 MM PLATE PREP...

Category: Die Cutters - Automatic and Hand-Fed

Machine Specification: BOBST EASY PRESS 103 2001 year of manufacturing size fits for 102 and 103 size Bobst Diecutting machines

Category: Die Cutters - Automatic and Hand-Fed

Machine Specification: Machine with blanker, partial rebuilt 7 years ago, very nice condition
advertisement