Weitere Maschinendetails:
Harris M300 - 630mm cut-off – 8 printing units – 2 webs – 2x16 pages in line
Year 1990
Plate cylinder circumference 630 mm
Max. web size 965 mm
Max. speed 35.000 c/h
Web direction seen from quality console left-right
- Press with mechanical shaft driven by two Siemens DC motors in Master –slave configuration. All driven press parts are connected by electrical clutches.
- Web splicer Butler 4050-12DM with weighting station. Max reel diameter: 1270 mm. Max web size 1070 mm.
- Printing units blanket/blanket. Plate and blanket cylinder with nickel surface run with contact rings large 35 mm. Max. printing length: 625 mm (5 mm without print). Pressure on/off done by pneumatic cylinders.
- Circumferential register (+/- 3 mm), side register (+/- 3 mm), diagonal register (+/- 0,3 mm) motorized and controlled from quality pult
- Inking unit with 13 rollers in the lower unit and 14 un the upper unit.
- Dampening unit alcol based Harris Duotrol
- Thermoregulation of oscillating rollers in the inking units
- Web tension adjustment Harris, electronically controlled.
- Folder model 4D for 2 webs with possibility to produce tabloid, double parallel, delta and A4 format.
- Folder 4DS for A4 format
- 2 dryers placed upon TEC EUROTEC 70/70-2-980, natural gas fed.
- TECTURN system for web deviation
- 2 Baldwin system for dampening water production and circulation
- OXY DRY blanket washer
- 2 silicone units RYCO Series 12000 recto/verso
- 2 chilling units HARRIS with 4 cylinders.
- Color register control Grafikontrol CR6
- Cut register control Grafikontrol CR8
- 2 Planatol Opimatic systems 2000 for fold softner and web gluing.
- Plate bender Carlson
- Plate punching unit
- Plate scanner Densi II
- Automatic ink filling systems Technotrans with Calku-ink and Calcu-Stop
- 4 web aligner E&L DR5021
- Additional angle bar to run the B half web in the press center
- Fan-out adjustment with 3 air blows in each unit, for printing units 2, 3, 4 and 6, 7, 8 controlled from quality console
EN
ES
FR
CN