Goss G-15

Additional Machine Details:

Goss International G15 (22 ¾ x 38”), shipped new January, 2004 and started live production on April, 2004. The press consisted of eight units (4 x 4 stacked) / two webs, combination folder with in-line stitching & gluing,, Meg Tec dryers, Meg Tec pollution controls, Gammerler trimmers, Rima palletizing robot, Agfa plate processor and auxiliary equipment more described below.
Note: The combination 1:3:3 folder is equipped with a Tolerans stitching device and gluing system

Note: The Goss International G15 is designed to print premium quality printing and publications at speeds up to 50,000 cph …

• The Goss G-15, 22.750’’ (578 mm) x 38’’ (965 mm) consists of eight (8) perfecting printing Servo driven units configured as 4 x 4 stacked for two web operation.
• Two Meg Tec, model DLP 2- 50" reel stands (pasters splicer) for two web operation (one retrofitted in 2018)
• Meg Tec loading system including rails
• 1:1 plate to blanket cylinder arrangement ... inline stack
• Goss continuous dampening (four roller dampening). Upgraded in 2005 to improve the quality and waste.
• Two (2) Meg Tec DSA 130 closed loop infeed system with variable speed drive, harmonic with Erhardt + Leimer web guides for two web operation.
• Web severers.
• Shaftless press drive A/C Servo motors ... Retrofitted in 2020
• Contact infra red web detectors
• Two Baldwin web catchers
• Plate cylinder cocking
• Solid stainless steel plate and blanket cylinders mounted in pre-loaded spherical roller bearings
• Stainless steel bearers
• Tool-less narrow gap plate lock-up
• Form roll following
• Water cooled vibrators
• Form roll following
• Segmented ink blades
• Plate cylinders are equipped with narrow slot lock-ups
• Blanket cylinders with reel rod lock ups
• Motorized circumferential and lateral adjustment ... auto control with Quadtech
• Motorized Plate cylinder cocking from the EAE ink control desk
• Motorized pendular cut off compensators ... auto control with Quadtech
• Sequential start-up with eight different programmable sequences and automatic sequence
• Two (2) Meg TecDual Dry III 80 gas dryers for two web operation
• One (1) Meg Tec Epsilon after burner pollution controls designed for 10000 Nm3 exhaust rate ... located out side
• Four (4) Betz ink pumps for two types of ink (coated and uncoated) ... 8 pipelines going to the press line
• Two (2) Meg Tec four (4) roll chill stands for two web operation ... shaftless
• Goss C 1:3:3, jaw folder / former assembly / in-line timed perforator / quarter folder attachment, Tolerans speed liner in-line stitcher combination folder for two web operation. Note: Maximum print capability: 8 to 32 pages quarter fold with 4 pages step without using the ribbon deck Also folder is equipped with cross and spine perforation ... speed 45,000 rph with quarter fold, 50,000 rph without the quarter fold ... no D/P attachment ... folder is servo driven
• Tolerans inline stitcher Speedline 12 mm / 0,50 mm / installed on folder
• Planatol Combijet 5 DT inline gluing system
• Scheffer model C2 ribbon deck / two webs in / four ribbons out
• Two (2) Meg Tec DSA 130 closed loop infeed system
• QTI automatic color register control RGS IV
• QTI automatic cut off controls ...PPC 3000X
• Four (4) E& L automatic web guides
• Quadtech Icon base inline color control (CCS) with Instrument Flight, register system (RGS) and cutoff control system (RCS). All MultiCam (Retrofitted in 2016 also with a new Primary PC)
• Arcade chilled water supply equipment with Carrier cooling unit (outside)
• Oxy Dry automatic blanket wash up units
• Two (2) Technotrans silicone applicators for two web operation with mixing unit
• Technotrans Gamma sd 300W dampening circulator system
• Bustle wheels ... wheels and air option
• Goss information center which includes production reports, fault recording
• Low pressure air blower
• 2B Prazision semi automatic double edge plate bender
• 2B Prazision manual plate punch
• Gammerler trimming line (RS 134 /530) and conveyors & compensating (KL 550) stacker with waste gate ... new in 2003
• Rima blocking unit and a auto robot palletizing system ... new in 2006
• Mix of Gammerler and Rima conveying system ... installed in 2006
• Mosca inline automatic strapping units
• Agfa Avalon LF thermal, plate developer, plate magazine and plate manager
• Kongskilde paper exhaust system for the Gammerler trimming system
• All press, folder and auxiliary manuals that are available at time of dismantling
• Any spare parts that are available at time of dismantling

Note: EAR press control system, Info PC, Print PP and Preset control ... retrofitted in 2013 with all new computers ... new EAE Net PC installed in 2020



Price: upon your request ... available immediately ... Machine is still in operation
Glenn Brotemarkle
Printing Equipment Services
3101 Country Club Drive
McKinney, Texas 75070
214 215-1973
glennbrotemarkle@aol.com

Rating:
Mechanical Condition: Very Good