MAN ROTOMAN N (620)

Additional Machine Details:

Cut-off: 620 mm
Max. web width: 965 mm
Min. web width: 550 mm
Max. speed: 70.000 cycles/h.
Paper stock range: 37-130 g.m2
Reel diam max.: 1270 mm
Score diam: 76 mm
pages: 16
Groupes: 4x 1 1 printing units
Reelstands: 1
Folder(s): 1
Dryer: 1 gas thermal heatset dryer MEGTEC, type: Dual Dry TNV 108 OMEGA
Printing unit(s): 4
Reel Splicer: 1

MAN U Load PASUSYS manual system of reel movement with platform and one transporting trolley <> Reel stand MEGTEC DLC-1600 - no mechanical connection to the machine <> Gluing unit DSA 130 (3-130 daN) with automatic reel change <> Rotoman printing units, double vertical 4-cylinder printing unit <> Plates 0.3 mm thickness <> Circumferential adjustment of plate cylinders /- 4 mm <> Longitudinal adjustment /- 3 mm <> Automatic wash-up device OxyDry for 4 double units <> Ink supply (ManRoland/Bets) <> Dampening solution supply (Technotrans delta.d 200W) with console TFK31 and digital indicators <> Alcohol control unit Alcoprint 3000 Unisensor (0-15%) and additional pump <> 1 paper set-up and control chain system from reel stand to the folder <> 1 paper roll rewind interlock, manufactured by MAN Roland - placed between the last printing press and the dryer. It protects the printing machine from winding when the paper web breaks in the drying zone. <> 1 thermal heatset dryer MEGTEC, type: Dual Dry TNV 108 OMEGA <> Cooling device <> 1 folder with 2 channels A3, A4, A5 formats <> 1 Folder With two pairs of pivot rods. Consists from: <> 1 pair of side walls, with good access to paper canvases, <> prepared for installation: <> - one silicone device, <> - one blade motion regulator, <> - two sensors for adjusting the registration of the cabin into strips, <> - two paint sensors; and <> - adhesive device <> 1 movable slitting device <> - with 1 slit in front of the displacement devices <> - with a common adjustment drive along the axis of the upper and lower, with its own drive, knives <> - with adjustment and control from the control panel <> 1 electrically powered pulling devices <> - with pressure roller for full-width paper web in front of swivel rods <> - acceleration is regulated from the control panel <> 1 rotary rod device <> - with 2 pairs of pivot rods for S-turn <> - rotary rods: <> - blown by air <> - have an air cushion adjustable in width <> - with lateral movement using a drive <> - adjustable from the control panel <> 2 control devices <> - with an adjustable motor register register on the strip <> - with adjustment and adjustment from the control panel <> 1 funnel roller with drive <> - with tension rollers and middle section <> 1 full-fold feeder (70 ° funnel angle), <> - with edge blowing for the first longitudinal fold <> - with take-up rollers <> - with length adjustment and pre-setting <> - funnel with paint-resistant coating <> 1 device of longitudinal perforation in the funnel <> Perforation comes from the bottom up and can be adjusted on the go. <> 1 cooling blower <> - 1 x on the funnel <> - 1 x on pivot rods <> The spout of the funnel shows the direction of movement of the paper. <> 2 measuring rollers of a tension of a paper cloth <> 2 pulling devices after swivel rods with pressure rollers <> 1 Silicone applicator ManRoland/Wekp type 2 x WFG 1.4 for double-side application <> 1 Cut adjustment unit ManRoland CutCon <> 1 Longitudinal gluing device Planatol CombiJet 7 COM with second circumferential folding cylinder for parallel and delta-fold <> Central cooling station Axima Aqua Center <> Technotrans ink supply <> RIMA stacker with 4-side trimming

Rating:
Mechanical Condition: Good

Dealer's Reference Number:

333378