Search Filter
Search Filter

Used Komori Lithrone, Sprint, Spica and Enthrone presses for sale

Used Komori printing machines

 

Komori began to make inroads in the European and US markets in the early 1970s with the introduction of the Sprint 25, Sprint 26 and then Sprint 28 range of single, two and four colour presses.  Its SRA2/25” Sprint models made their way to Europe in the early 1970s, starting with the Sprint 25 range (S225, S425) Sprint S 26 (S226, S426) and the Sprint 28 (S 228, S 428 and S 528) press.  Entry into the more prestigious, high quality end of the market came with the Komori  Lithrone range some years later, allowing the company to introduce refinements like Komorimatic damping,  SAPC semi-automatic plate changing, and PQC print quality control.  On the second hand market the B1/28” Komori Lithrone 28 is very popular on pressXchange, primarily used Lithrone L428, L528 and L628.   But there are even more second hand B1/40” Lithrones 40, with used L-40, LS-40 and GL-40 presses.   Pre-owned 4 colour Komori LS 440, LS and GL 540 five color and 6 colour  Lithrone L 640+C are particularly sought after.

Today used Komori Spica 26 and 29 models are popular, as are secondhand Enthrone 26 and 29 presses.  

Category: Sheetfed

Machine Specification: Komori LA 437 H-UV Year: 2014 Maximum sheet size: 64 x 94 cm 42 million impressions approximately Carton device High Speed Start-up PQC-S PDC LITE II Scanning Density Control System...

Category: Sheetfed

Machine Specification: Perfecting 2+5/7+0 Hybrid Press PQC - Print Quality Controller PDC-S Xrite Densitometer Komori KHS System AMR - Automated Make Ready KMS - Komori Management System APC - Automatic Pla...

Category: Sheetfed

Machine Specification: Six color forty inch plus tower coater and extended delivery 300mm / 12” raise kit Features PDC-SX closed loop printing density control with spectrophotometer and interface with Pre-ink...

Category: Sheetfed

Machine Specification: 1993 Komori L 428 Komorimatics, PQC Console, R&R, Plate Cocking ,Chrome Cylinders, 35mm Imp, $69,000 LOC

Category: Sheetfed

Machine Specification: Komori LS 540 Year of man.2003 Impr. 108 mil Remote control Komorimatic ITC Ink temperature control Automatic Plate Change Technotrans All washers Grafix Digitronic 3000 Non-stop on feeder &...

Category: Sheetfed

Machine Specification: Dear Sirs, AS OWNER, We are pleased to offer you to our standard conditions of sale and delivery the following machine - subject to prior sale: KOMORI L428 EM age 1998 Machine no. 218...

Category: Sheetfed

Machine Specification: ABOUT 1995 - KOMORIMATIC - PQC REMOTE CONTROL - BLANKET WASHER - QUICK CLAMPS - REGISTER - DECURLER - POWDER SPRAY - CHROMED IMPRESSION CYLINDERS -

Category: Sheetfed

Machine Specification: EM Model  Max Speed: 16,000 iph Max Sheet Size: 530 x 750 mm SAPC - Semi Auto Plate Changing PQC - Print Quality Control Lateral, Circumventual, Diagonal Register Control K...

Category: Sheetfed

Machine Specification: Format Six Color 24” x 29” with Type V Chamber Coater + UVED (blanket clamp type) Maximum printing speed 16,000 sph Maximum printing area 23” x 29 1/8” Sheet thickness range 0.0016”...

Category: Sheetfed

Machine Specification: PQC-S KMSIV Paper Thickness Pre Sets PDC-SII Komorimatic Damping Technotrans Alpha 'D' Semi APC Transfer Cylinder Cocking Auto Ink roller Wash Auto Blanket Cleaner Auto Impression...

Category: Sheetfed

Machine Specification: SAPC-Semi automatic plate change Delivery mounted offpress console Stream feeder Paper size presets Komorimatic dampening with recirculation Chromed cylinders Powder spray

Category: Sheetfed

Machine Specification:

Category: Sheetfed

Machine Specification: PQC Off Press Controls KMS IV Monitoring System AMR Presets – Automatic Make-ready Komorimatic Dampening Ink Temperature Control Combination Unit for Recirculation and Refrigeration Se...

Category: Sheetfed

Machine Specification: 5 COLOUR STRAIGHT B2 PRINTING PRESS VERY LOW IMPRESSION COUNT!! Max Sheet Size: 530 x 750mm Max Speed: 16,000 SPH Equipped with: - PQC-S Off Press Control Console - KMS IV Manageme...

Category: Sheetfed

Machine Specification: Max Speed: 16,000 iph Suction Tape Feeder Table SAPC - Semi Automatic Plate Change PDC Lite 2 - Colour Scanner/Management PQC Off Press Controls KMS - Komori Managment System K...

Category: Sheetfed

Machine Specification: PQC AMR KHS Semi Automatic Plate Change Komorimatic Damping Refrigeration and Recirculation Powder Spray Device Auto Blanket Roller Wash Auto Ink Roller Wash

Category: Sheetfed

Machine Specification: 2 x H-UV lamps at units 5 and EOP (Delivery) - Installed in 2012 PQC console for ink and register PDC-SII for closed-loop scanning F-APC - Fully automatic plate changing Komorimatic damp...

Category: Sheetfed

Machine Specification: Komori L226 Serial number 406 2-color, 20 X 26-inch offset press High pile delivery Double diameter transfer and impression cylinders Komorimatic dampening system Dampening system circulator...

Category: Sheetfed

Machine Specification: Features KHS-AI Advanced Interface pre-inking system PDC-S II Print Density Control – Spectrophotometer PQC-S off-press controls with plate cylinder cocking Vacuum belt feed board and pn...

Category: Sheetfed

Machine Specification: 2006 Komori Spica 429P 36 Million Impressions, available immediately.

Category: Sheetfed

Machine Specification: SAPC,PQC - Print Quality Control,KMS IV,Komorimatic Dampening,Technotrans Refrigeration & Recirculation,Plate Cylinder Cocking,Auto Ink Roller Wash,Auto Blanket Wash,Anilox Coating Unit,Chro...

Category: Sheetfed

Machine Specification: Equipped with the following: Series 45 machine fully equipped with AMR pre-set device - KMS IV - PQC-S console - Air Transfer on Skeleton cylinders with Air Cabinets - Chromed cylinders...

Category: Sheetfed

Machine Specification: PQC,PDC-S11 Spectrodensitometer,Komorimatics,APC (Automatic Plate Changing),AMR (automatic make ready),Pre Inking,Non stop feed/delivery,Ink vibrator cooling,Programmable blanket/roller/imp....

Category: Sheetfed

Machine Specification: KOMORI L628 - Aqueous Tower Coater - Extended Delivery - SAPC - Console - Komorimatic Dampening System - Chilled vibrator rollers - Powder Spray - IR Dryer R-R - Plate Cocking - Sheet Decurl...

Category: Sheetfed

Machine Specification: PQC,Komorimatic dampening,SAPC,Continuous feeder,Chromed cylinders,Cylinder cocking,Technotrans recirculation/refrigeration,Programmed roller and blanket wash,Weko powder spray device,Steel...
advertisement