pressXchange

Used die cutting machines

Iberica SPD  105F Die Cutting
Category: Die Cutting
We are pleased to offer: Iberica SPD 105F Year 2008 Sheet size max. 750 x 1050 mm Sheet size min. 350 x 400 mm with Stripping unit, 9000 SPH 300 Tonne pressure Boar Max 1.8mm Co...
Crathern FB-3A Flat board spotter laminator Die Cutting
Category: Die Cutting
Model #FB-3 55" Board Feed FMC w/gluer 39.5" Serial number AS889, 240V, 60Hz, 3Ph+ground, 15A service Automatic laminating of paper to board. Rigid/set-up box businesses. Small displ...
Bobst 1260 Die Cutting
Category: Die Cutting
Lots of extra parts 2 chases Stripping
Bobst SP 102-E Die Cutting
Category: Die Cutting
Autoplatine Flatbed die cutting machine BOBST SP 102 E, Year: 1989, Sheet size: max: 720×1020 mm, Sheet size min: 350×400 mm, Speed up to 8500 sheet/hour, Pressure: max. 250 T, with Strippin...
Johannisburg 104S Die Cutting
Category: Die Cutting
1971 Johannisberg 104S Serial no: 2155810 The machine was fully rebuilt by Senior graphics. The machine is in working order and can be seen running on site if needed. Location: Nechells...
Brausse SBL 1050 SE  max board size 1050 mm x 750 mm Die Cutting
Category: Die Cutting
1996 Brause SBL 1050 SE Max. paper size 1050 x 750 mm Min. paper size 400 x 370 mm Max. die-cutting paper size 1040 x 730 mm Min. gripper margin 9.5mm Die-cutting force 300 Tons Outer...
Bobst SP 1260 E Die Cutting
Category: Die Cutting
We are pleased to offer: BOBST SP 1260 E BOBST S.A. Switzerland Type: SP 1260 E Age: 1962 Max. Sheet Size: 1260 x 920 mm Min. Sheet Size: 500 x 350 mm Speed: 4.500 Sheets/hr 500t p...
Heidelberg S Cylinder Die Cutting
Category: Die Cutting
Maximum Sheet size 540x720mm Minimum sheet size 115x160mm Running speed 3,500sph
Bograma BSM 450 Die Cutting
Category: Die Cutting
Perforation up to 2 mm, filing-hole punching up to 5 mm, cutting up to 5 mm, die-cutting up to 2 mm (depending on format and quality)
1989  Blohm + Voss  CCE F4 Die Cutting
Category: Die Cutting
We offer as an owner: Format max. 800x1120mm Format min. 360x500mm Nnb2b Gripper edge from 8 to 14mm Max. Cutting force 3.1 MN Max. Cutting surface 780x1110mm Height of the cutting ed...
Bograma BS Multi 750 Servo  Die Cutting
Category: Die Cutting
Bograma BS Multi 750 Servo perforation, punching, cutting, die-cutting in production good condition immediately available
KAMA DC 76 Die Cutting
Category: Die Cutting
One (1) "AS IS WHERE IS" KAMA DC 76 die cutter.
KAMA ProCut 76 Foil Die Cutting
Category: Die Cutting
One (1) "AS IS WHERE IS" KAMA ProCut 74 Foil. Manufacturer's website says: "The most versatile solu­tion for print finishing and & lucrative post-press. No other machine is this vers...
1983 Bobst Autoplaten SP 1600-E Die Cutting
Category: Die Cutting
Specifications: Year 1983 Running Speed: 5000 Per Hour Size MAx: 160 X 111.5 CM Size Min: 85 X 60 CM Cutting Force up to 7.5 MN ( 750)Tons
Bograma BMS 450/220/15 + UEB 550   2005 Die Cutting
Category: Die Cutting
This machine is in good condition and can be seen in Denmark Perforation up to 2 mm, filing-hole punching up to 5 mm, cutting up to 5 mm, die-cutting up to 2 mm (depending on format and qu...
Heidelberg Varimatrix 105-C Die Cutting
Category: Die Cutting
1 pc. used Cutting, Creasing and Embossing Press Varimatrix 105 C for the converting of paper, carton and B-flute corrugated board without stripping - max. sheet format 750 x 1050 mm...
WUPA WPM MAGNATOP PS 4.4 C Die Cutting
Category: Die Cutting
2 chases 2 frames Double stripping unit Overhauled in 2019 Cleaned and painted Brand new software program in 2019 It is very good condition Available immediately
Bobst SP 102 SE Die Cutting
Category: Die Cutting
2 chases, 2 frames, stripping unit
Bograma BS Multi 450 s die-cutting and punching machine Die Cutting
Category: Die Cutting
Bograma BS Multi 450 s die-cutting and punching machine Automatic die-cutting and punching machine for inline operation with folding machines, saddle stitchers etc. Pivoting range 540 -...
Bobst S Peria 106 E Die Cutting
Category: Die Cutting
Die cutter Autoplatine Bobst S Peria 106 E Year of man.:2005 Max. paper size 740 x 1060 mm Stripping section Prepared for die-cut PVC, PET etc. Ready for stamping Equipped with a hob...
Bickel TS 3 perforating and die-cutting machine  Die Cutting
Category: Die Cutting
Bickel TS3 cutting, die-cutting and perforating machine. Equipped with products magazine, infeed, 2 perforating / cutting units. Transport belt, delivery belt and many spare parts and...
Mühlbauer CP 2020 / M Die Cutting
Category: Die Cutting
die cut sheet 3 x 7, 3 x 8 or 3 x 11 pieces of cards 3 drawers for cut products