(6x) Tower Tensor 1400 22" (560mm) Coldset Press

Más información sobre la máquina:

Includes Prime UV system for one web

2001 Tensor Model 1400 single-width, single around
Cutoff 22” (560mm) - Web width maximum designed 35”
2001 Vintage, one (1) tower was added new in 2006

(2x) H50 half & quarter page folders each with air former boards, cross-head perforation, softener and under folder web leads
• (1) upper former on folder “A” with air former board
• (1) Cary 3-web ribbon deck over folder “B” for 32 page tabloid
(4x) 150HP ABB controllers with Four (4) 150HP drive motors with blowers
(2x) main operating consoles
(6x) 4-high Tensor 1400 printing towers each with:
• Slot Plates and Reel Rod blankets (narrow gap)
• CC1 closed loop registration (auto register) motorization with two cameras for each four color web
• EPG automatic inking system with pre-sets and two consoles
• Automatic ink levelers
• Spiral brush dampening
• Full-page motorized compensator
• Bustle wheels and fan-out roller
(6x) Jardis model FS5036 splicers with integrated hoist and lifter bars and air shafts. 50" roll capacity
(3x) 2-web right angle bars with blowers
(3x) Rudder infeeds on right angle bars
(1x) Baldwin Automix
(1x) fountain solution circulator with chiller

All associated spare parts, manuals, mechanical and electrical drawings and press tools

Important Features of this Press:

Cutoff Savings:
22" vs. 22.75" is 3 .3% percent savings on whatever web width you are running. Depending on exact image size , a tabloid product may have to narrow the columns slightly . Often extra image area can be found in page gutters.

Jardis Zero-Speed Splicers:
Compared to manual integrated roll stands , running waste savings is around 3.5% depending on basis weight you are running and how many copies you waste on pull up after roll change . There is probably another 1% or so in eliminating butt roll handling and re-winding.

Rudder lnfeeds:
On process color work , the Rudder lnfeeds keep the web tension constant , which dramatically helps
register quality and therefore eliminates waste of at least another 1% to 2%.

CC1 Automatic Registration System:
Each tower has motorized sidelay and circumferential registration. With the use of cameras mounting at the top, full process color can be registered automatically thereby providing a "closed loop" system . This system will reduce the man power needed to operate the six tower press as well as save up to 3% on paper waste.

EPG Automatic Inking System:
With automatic ink adjusting from the console with pre-set ink controls, this also will reduce manpower
and reduce waste. The system is able to "learn" certain print jobs to more accurate pre-set ink each time .

Automatic Ink Levelers:
These eliminate the need for press operators to fill the ink fountains. On a tower press, it is a great labor
saving device .

Número de referencia del distribuidor:

6259