pressXchange
Esta máquina ya no está disponible
Encuentra máquinas similares a continuación
4    0 1 / 4

Horizon HT-1000V

Categoría: Guillotinas trilaterales
Fabricante: Horizon
Modelo: HT-1000V
Año: 2014
ubicación: Belgium


Más información sobre la máquina:

Variable Trimmer HORIZON HT-1000V of 03/2014 with camera and siliconspray - counter : 1.143.473 cuts
The Horizon HT-1000V three-knife trimmer achieves zero make-ready on book trim size and thickness changes. Well suited for shortrun production, and book of one production can also be achieved through barcode driven set-up.

Automated set-up – The HT-1000V is set-up automatically on the fly by reading a barcode at the entrance of the trimmer. The system also is capable of automatic set-up from the operator panel for same size production runs.

Variable size trimming – One-to-one book production with variable sizes can be produced. Both untrimmed and trimmed sizes can be variable for true variable format production.

In-line Production – The HT-1000V can be placed in-line with Horizon perfect binders to maximize finishing automation and minimize human operation error.

High Speed Operation – Maximum cycle speed of the HT-1000V is 1,000 books / hr.
For example, A4 to A5 alternating sequence (book of one production) can be *950 books / hr.
(* Production speed depends on book condition and preparation of untrimmed books.)

JDF Workflow – The HT-1000V can be connected with the Horizon pXnet JDF workflow for finishing production efficiency and management.


Specifications
Model HT-1000V
Untrimmed Book Size Max. Spine Length 350 x Fore-edge Length 320 mm/ 13.780” x 12.600”
Limitation: The maximum length from the center to top or bottom is 175 mm/ 6.889”.
Min. Spine Length 148 x Fore-edge Length 105 mm/ 5.825” x 4.130”
Limitation: The minimum length from the center to top or bottom is 74 mm/ 2.91”.
Trim Width Fore-edge: Max. 110 mm/ 4.330” Min. 1 mm/ 0.04”
Top and bottom: Max. 80 mm/ 3.150” Min. 1 mm/ 0.04”
Trim Height 1 to 65 mm/ 0.04” to 2.560”
Production Speed 400 to 1,000 cycles per hour (Higher production can be reached withpiled books.)
In case of the following trimmed condition, the production speed can reaches to 1,000 cycles per hour.
- Constant untrimmed size to constant fi nished size
- Constant untrimmed size to A4/letter size through A5/half letter fi nished size

Rating:
Estado de la máquina: Very Good

Número de referencia del distribuidor: RO900-61100

pressXchange Machine Tools