2002 M600 (8) Unit (2) Web Offset Press

Más información sobre la máquina:

Heidelberg M600 B24 (8) Unit (2) Web
Vintage: 2002
Cutoff: 22.75” (578mm)
Web Width: 38” (965mm)

Eight (8) unit, Two (2) web Heidelberg Web M600 Press W/Auto Plate
Siemens Drive System consisting of drive motor for the splicer and infeed, Two (2) motors for printing units and one (1) motor for the chill rolls and folder.
Shaftless Constant Tension Infeed with integrated web guide.
Dual Dampener (integrated/segregated) with push button changeover.
Four (4) roller continuous damper consisting of a variable speed pan roller, chrome plated metering roller, risen covered vibrator roller and rubber form roller.
Dual Inker (100/0/0 or 80/10/10)
Fifteen Roller Ink Train (upper & lower) consisting of:
Three ink form rollers (3.54”, 3.35” and 3.75” diameter)
Four nylon vibrator rollers (4.37”)
Four distributer rollers (4.13” and 3.07”)
One nylon rider roller (3.35” diameter)
One spiral grooved ductor roller (3.35”)
One motorized ink fountain ball (5.12” diameter)
Large capacity ink fountain with segmented fountain blade (30 keys)
Omnicolor consoles – Remote ink Key Control
Single wrench roller adjustments
Autogapping feature
Pneumatic unit to unit Platforms to permit rapid plate changes with the web in the printing units.
Spring loaded, toggle style plate lockups
Hardened steel plate and blanket cylinder bearers
Motorized Circumferential Register Adjustments
Motorized Lateral Register Adjustments
Motorized Plate Cylinder Cocking with form roller following
Plate cylinder undercut .015”
Blanket cylinder undercut >071”
.380” mechanical blanket cylinder gap with unit phasing
Automation Lubrication of cylinder and vibrator bearings
Manually operated clutch to silence units, inker or dampener at unit
Worm and wheel unit drive with a 4:1 drive ratio
Motor driven oil pump for continuous gearside lubrication
CP-Tronic Press management Console
Shaftless HCR Chill Roll Package: 6 x 14.84 diameter rolls per web.
HWS/Weko Integrated Web break detectors
HWS supplied Web Severers
JF-50 Automatic Changeover Folder (rated 50,000 iph)
Full web compensator and chrome plated driven roll per web
One slitting section for edge trimming or slitting per web
Four (4) angle bars including bay window for each web
Two linear web compensators per web
Harmonic drive at the RTF for variable tension control
Motorized tall air former drilled for air
Two (2) sets of air loaded 2” wide urethane nip rollers for each web
Depth adjustment
Timed circumferential perforator
One (1) around cutting cylinder
Three (3) part pin and tucking cylinder with active tucker blades
Three (3) part first jaw fold cylinder with motorized on the run lap adjustment
Two (2) part second fold (Delta/DP) with on the run lap adjustment
Spine leading jaw fold and quarterfold delivery
On the run motorized vertical chopper blade phasing
Patented vacuum chopper table with six (6) belts across table
Circulating oil lubrication for main folder gears
Pneumatic clutch for folder silencing
Folder weight of approximately 24,250 pounds
Cross perf cylinders with on the run phasing
Max web width 38”, Min web with 16.5 over the former

Auxiliary Equipment:
Contiweb SH40-CI Splicer w/infeed
Contiweb Ecotherm dryer with integrated afterburner
AWS Vibrator cooler
Two (2) AWS CRP-1H Chill roll paks
Sixteen (16) AWS Ink Levelers
AWS Circulator system
One (1) AWS LPC 1200 low pressure air cooler
QTI Web Guide controls for web guide located in splicer infeed
QTI Dryer web break detector mounted in dryers
QTI Cutoff controls
QTI PPC 3000x control station and interface module
QTI RGS V Register System
QTI Model 4000 silicone applicator
Spencer Blower
Oxy Dry Blanket wash system
Airturn for second web
Penn/SMC V-2000-1-42 Stacker/Bundler, Dynaric strapper
Gluing and moistening system
Single web perf unit

Número de referencia del distribuidor:

H020221