Etirama Superprint 350 Print width: Max. 350mm / Min. 200mm Maximum substrate width: 360mm Maximum mechanical speed: 120 meters/minute Tension control between print modules (INFEED and OUTFEED) Tension control in die cut station (OUTFEED) Maximum coil diameter of unwind and rewind: 800mm (maximum weight: 140 Kg) Unwind tension control with pneumatic brake + load cell Rewind tension control with pneumatic clutch + manometer End of bobbin sensor Web guide electronic and ultrasonic Transmission system by means of shielded transmission box and shaft between the print stations and the die cut station. 8 flexo print stations Anilox rotation and throw-off of plate cylinder when press is in stand-by. Individual operation panels for each printing unit. 2 rotary die cut cylinders (double die cut station) Anvil rollers with 100mm diameter Longitudinal cut system, independent, with circular-knife slitters RD Scorer unit with 2 Holders and blades by OEM supplier – ROTOMETRICS Magnetic cylinders gear sizes 71 80 88 96 122 130 Z Waste Rewind with compactor arm 2 Hydra Jack Assembly 11-170 including cam locks. 08 UV dryer model S360 (supplier OEM - UVTECH) Power: 330 Watts/inch Individual electric cabinets per each dryer Operates in synchrony with the printing speed (automatic) Air cooling system (exhaustion motor included) 08 hot air dryers Dryers coated with insulating materials, equipped with infrared resistors Air blowing and exhaustion system, and independent heat adjustment (each printing unit) WEB TURN BAR - Installed on drawer-style rail, with rails in print stations #1 and #2. DELAM-RELAM - Installed only in the first printing station - Required the use of the web turn bar simultaneously. COLD STAMPING/ UV LAMINATION 1 system to print Cold Foil to be used in a pre-defined print station, consisting of the following parts: 01 unwinder + moveable foil rewinder capable to work with bobbins of up to 250mm diameter + fixed nip roll. Mandrels with pneumatic locking for 3” cores. Equipped with clutch and brake mechanically activated It can be used (not simultaneously) as a lamination system VIDEO SCAN 1 Video inspection system, non motorized, by OEM supplier Erhardt Leimer. CERAMIC ANILOX CYLINDERS - 06 ceramic anilox cylinders, hexagonal engraving, by OEM supplier– APEX 1 cylinder with 1,120 LPI; 2.2 BCM (for CMYK printing) 2 cylinders with 1,070 LPI; 2.4 BCM (for CMYK printing) 1 cylinder with 1,015 LPI; 2.5 BCM (for CMYK printing) 1 cylinder with 865 LPI; 2.8 BCM (for line work) 1 cylinder with 405 LPI; 6.1 BCM (for solid printing or varnishing) - 02 ceramic anilox cylinders, GTT engraving, by OEM supplier– APEX 1 cylinder “L” type (for heavy solids) 1 cylinder “M” type (for heavy solids) PLATE CYLINDERS - Plate cylinders with gears (71T) (80T) (88Z) (96T) (122T) (130T), for 67thou-plates & 15thou-mounting tapes), by OEM supplier – ROTOMETRICS -Tint Mandrel 88T including (Tint Rubber EPDM-White-70 Durometer 3x3.5x18 57-003C) And (Air Assist Stand Assembly) SHEETING UNIT WITH CONVEYOR - Conveyor for sheets stacking. - Programmable digital counter and automatic sheet separator.
Don't miss upcoming auctions
EN
DE
FR
CN