Más información sobre la máquina:
BOBST GROUP
TITAN SR8
SLITTER REWINDER (ABLE TO CUT 10 MICRON FILM!!!)
Year: 2006
Availible: immediately
PRODUCTION OPTIONS
The Titan SR8 machine is built to cater for a wide range of flexible materials and to produce high quality finished product efficiently, economically and with repeatability.
MACHINE CONFIGURATION: 'FREE STANDING' (UNDER PLATFORM)
Material specification:
Film *Plain, Printed, coated or metallized from 10 up to 200 micron.
Laminates *Film/Film, Film/Foil, Film/Paper, Foil/Paper, Film/Foil/Paper
Paper & Board *Paper 20 - 350gsm, board 180 - 400gsm
Machine speed (m/min) 600 (Dependant upon materials)
Unwind
Max. web width (mm) 1650
Max core width (mm) 1650
Min reel core width on 3" cores (mm) (Combi Chucks) 330
Min reel core width on 6" cores (mm) (Combi Chucks) 520
Min reel diameter for loading (mm) 400
Min reel diameter for unloading (mm) 400
Max. reel diameter (free standing) (mm) 1300
Max reel weight (free standing) (kg) 1800
Minimum tension (N) 80
Maximum tension (N) as standard 400
Web guide
Max. web guide movement (mm) +/- 75
Guide movement speed (mm/sec) 22
Type of actuator Electric Servo
Slitting
Manual knife positioning
Max. knife diameter (mm) Female 105 / Male 130
Min. knife diameter (mm) Female 105 / Male 125 (with gear change)
Min. slit width (mm) Razor & Shear 50
Max. slit width (without 'Roll out device') 2/3rds of maximum web width
Rewind
Core tolerance (mm) 76.2MM - 0.2 I+ 0.5
Max.supported weight per shaft (kg) inc. unload support 400
Minimum tension (N) 0.08N/mm (130@ width 1650mm)
Maximum tension (N) 0.5N/mm (825@ width 1650mm)
Max. Rewind Diameter (mm) 800
Unloading
Max. weight per unload shaft (kg) 400
Max. slit width (without 'Roll out device') 2/3rds of maximum web width
Trim Extraction
Max I Min Width trim (standard system) (mm) 5-30mm
Max. Weight trim (standard system) (Micron) 100@ 600m/min
Service requirements
POWER
Voltage 380-420V - 3 phase (No Neutral)
Frequency 50-60 hz
KVA 45KVA at 63 amps
AIR
Pressure 6-10 bar
Consumption 0.2 Cubic meters per minute
Quality Clean & Dry filtered to 0.3Micron
particles 99.9% oil mist removed
Pipe connection 1/4" B.S.P. (under main drive guard)
WEB PATH CONFIGURATION
'Free Standing' (Under platform)
'FREE STANDING' SHAFTLESS UNWIND
UNWIND TENSION CONTROL
AC MOTOR DRIVEN
CHUCKS
Mechanical Expanding Chucks
Combination Chucks
CANT ROLL
EDGE GUIDER
Fife SE-26 Sensor
SPLICE TABLE
Vacuum Splice
MACHINE CONTROLS
AC Digital servo controlled by an upgradeable state of the art industrial PC.
REWIND SECTION
MAIN (CENTRE) DRIVE
Lenze AC servo motor
BOWED ROLL (VARIABLE)
SLITTING SECTION (MANUAL KNIFE POSITIONING)
RAZOR SLITTING IN AIR
TRIM EXTRACTION SYSTEM
REWIND SYSTEM
DIFFERENTIAL REWIND SHAFTS
The new and patented TITAN differential rewind shaft can be applied on a wide variety of materials down to a rewind width of 50 mm.
With this system the tension in the product is constant across the full web width regardless of whether different widths of packages are being rewound at the same time.
TENSION CONTROL
LAY ON (CONTACT) ROLL ASSEMBLY
REEL HANDLING
Pneumatic Unload Boom
CE GUARDING & LASER SCANNER
MACHINE OPTIONS:
LASER CORE POSITIONING
REWIND STATIC ELIMINATORS
LAY-ON WEBCLAMPS
Rating:
Estado de la máquina:
Good