Category: CTP-Systems
This machine is very well maintain and makes very good quality polyester plates. We installed a new CTP. This was out CTP machine up until Nov 4th. The machine comes with aprox 2 rolls of pl...
Catégorie: AUTOPLATINES & DECOUPEUSES
Year: 2013
Machine is complete with no missing parts
Both board and corrugation attachments are present
Side gauge push and pull type are present
It also has micrometric and quick lock...
Catégorie: AUTOPLATINES & DECOUPEUSES
JOHANNISBERG 104 – DIE CUTTER
YEAR 1962 (Fully Rebuilt in 2013) # SIZE 730 x 1040 MM # STREAM FEEDER
USED FOR CUTTING / CREASING / PERFORATION # UP TO 4000 SPH SPEED
IN EXCELLENT WO...
Catégorie: PLIEUSES COLLEUSES
We are pleased to offer:
Panmer Alba 110 Year 2013
Carton glue
Maximum Width: 1100 mm - 43 inches
With crash lock and 4 corner
Made under license for Jagenberg
With glue guns and b...
Catégorie: PLIEUSES COLLEUSES
Automatic folder gluer for the production of straightline, crashlock, 4 & 6 corner cartons.
Max open blank width : 980mm
Min open blank width : 220mm
Max feed up length : 750mm
M...
Catégorie: MACCHINES Á TRANSFORMATION
Middle Speed Paper Cup Forming Machine, previously in production in the Netherlands
For automatic production of paper cups, with speed of up to 5.400 paper cups per hour
Paper cup specif...
Catégorie: ÉQUIPEMENT FLEXOGRAPHIQUE
Excellent condition
6 offset printing units
2 flexo printing units
UV drying for all printing units
Gap Master
Corona
Martin Automatic Unwinder/ Rewinder
Automatic Control Panel
Auto...
Catégorie: AUTOPLATINES & DECOUPEUSES
Computer touch screen for forwarding band control; temperature control Pull lay operator side Non-stop on feeder , Automatic Non-stop with carpet in delivery , No. 3 shafts for pushing forwa...
Catégorie: AUTOPLATINES & DECOUPEUSES
2006 BRAUSSE 1050 SE AUTOMATIC DIECUTTER
Max Sheet Size - 750mm x 1050mm
High speed - up to 7,500 sheets per hour
300 Ton pressure
Pull lay
Push lay
Stripping unit
Cutting chase / Pl...
Catégorie: AUTOPLATINES & DECOUPEUSES
We are pleased to offer:
A Multi-Substrate Inspection Slitter Rewinder able to finish a wide range of supported and unsupported films, foils, label stock, papers and light board from thic...
Catégorie: Slitter Rewinders
We are pleased to offer:
BGM 450 Dieflex Year 2021
A Multi-Substrate Inspection Slitter Rewinder able to finish a wide range of supported and unsupported films, foils, label stock, paper...
Catégorie: MACHINES DE BOÎTE RIGIDE
Ref: 10748 . 1999 Emmeci MC92 Rigid Box Line
Excellent Condition - Fully reconditioned by Emmeci in 2018!
Automatic line for the production of rigid boxes.
Equipped with:
MC 1 – Automati...
Catégorie: AUTOPLATINES & DECOUPEUSES
1982 BOBST SP 126-E FOIL STAMPING DIE CUTTER
Max sheet size: 36.2" x 49.6'
Min sheet size: 13.77" x 19.68"
Cutting Pressure: 500 Tons Speed
Up to 5000 sheets per hour
Extra Honeycomb...
Catégorie: PLIEUSES COLLEUSES
2010 REVICART Double Feed TWINBOX 145 on horizontal rails
Which is a two-piece feeder that can run standalone to glue an insert onto a carton or you can couple it up to sit in front of a fo...
Catégorie: MACHINES DE MISE SOUS FILM
DEMPACK H22 - SEMI AUTOMATIC SHRINK WRAPPING MACHINE
YEAR CIRCA 2006 (serial no. 16573/M0603158) # FULLY CLEANED, CHECKED, SERVICED & TESTED
1 x AUTOMATIC L-SEALER # 1 x ON-LINE HEAT T...
Catégorie: AUTOPLATINES & DECOUPEUSES
Cutting Pressure 600 MN
Maximum sheet size 1420 x 1020 mm
Minimum sheet size 700 x 500 mm
Sheet - Solid board up to 2,000GSM and Corrugated up to 4mm thick
Push and Pull Lay options to...
Catégorie: Bag Making
Bag Size:L: 30~42 CM, W: 10~22 CM, H: from 33 CM
Sheet feed paper bag machine, Without reinforced lip, Without hole punching for handle