pressXchange
Cette machine n'est plus disponible
Trouvez des machines similaires ci-dessous

Machines similaires

7    0 1 / 7

Titan, Bobst Group SR 8 Slitter Rewinder (min. 20 micrones!)

Catégorie: REBOBINEUR
Fabricant: Titan
Modèle: SR 8
Année: 2006


Plus de détails sur la machine:

BOBST GROUP
TITAN SR8
SLITTER REWINDER (ABLE TO CUT 10 MICRON FILM!!!)

Year: 2006
Availible: immediately

PRODUCTION OPTIONS
The Titan SR8 machine is built to cater for a wide range of flexible materials and to produce high quality finished product efficiently, economically and with repeatability.
MACHINE CONFIGURATION: 'FREE STANDING' (UNDER PLATFORM)

Material specification:
Film *Plain, Printed, coated or metallized from 10 up to 200 micron.
Laminates *Film/Film, Film/Foil, Film/Paper, Foil/Paper, Film/Foil/Paper
Paper & Board *Paper 20 - 350gsm, board 180 - 400gsm
Machine speed (m/min) 600 (Dependant upon materials)

Unwind
Max. web width (mm) 1650
Max core width (mm) 1650
Min reel core width on 3" cores (mm) (Combi Chucks) 330
Min reel core width on 6" cores (mm) (Combi Chucks) 520
Min reel diameter for loading (mm) 400
Min reel diameter for unloading (mm) 400
Max. reel diameter (free standing) (mm) 1300
Max reel weight (free standing) (kg) 1800
Minimum tension (N) 80
Maximum tension (N) as standard 400

Web guide
Max. web guide movement (mm) +/- 75
Guide movement speed (mm/sec) 22
Type of actuator Electric Servo

Slitting
Manual knife positioning
Max. knife diameter (mm) Female 105 / Male 130
Min. knife diameter (mm) Female 105 / Male 125 (with gear change)
Min. slit width (mm) Razor & Shear 50
Max. slit width (without 'Roll out device') 2/3rds of maximum web width

Rewind
Core tolerance (mm) 76.2MM - 0.2 I+ 0.5
Max.supported weight per shaft (kg) inc. unload support 400
Minimum tension (N) 0.08N/mm (130@ width 1650mm)
Maximum tension (N) 0.5N/mm (825@ width 1650mm)
Max. Rewind Diameter (mm) 800

Unloading
Max. weight per unload shaft (kg) 400
Max. slit width (without 'Roll out device') 2/3rds of maximum web width

Trim Extraction
Max I Min Width trim (standard system) (mm) 5-30mm
Max. Weight trim (standard system) (Micron) 100@ 600m/min


Service requirements

POWER
Voltage 380-420V - 3 phase (No Neutral)
Frequency 50-60 hz
KVA 45KVA at 63 amps

AIR
Pressure 6-10 bar
Consumption 0.2 Cubic meters per minute
Quality Clean & Dry filtered to 0.3Micron
particles 99.9% oil mist removed
Pipe connection 1/4" B.S.P. (under main drive guard)


WEB PATH CONFIGURATION
'Free Standing' (Under platform)
'FREE STANDING' SHAFTLESS UNWIND

UNWIND TENSION CONTROL
AC MOTOR DRIVEN

CHUCKS
Mechanical Expanding Chucks

Combination Chucks

CANT ROLL
EDGE GUIDER

Fife SE-26 Sensor

SPLICE TABLE
Vacuum Splice

MACHINE CONTROLS
AC Digital servo controlled by an upgradeable state of the art industrial PC.

REWIND SECTION

MAIN (CENTRE) DRIVE
Lenze AC servo motor

BOWED ROLL (VARIABLE)

SLITTING SECTION (MANUAL KNIFE POSITIONING)

RAZOR SLITTING IN AIR

TRIM EXTRACTION SYSTEM

REWIND SYSTEM
DIFFERENTIAL REWIND SHAFTS
The new and patented TITAN differential rewind shaft can be applied on a wide variety of materials down to a rewind width of 50 mm.
With this system the tension in the product is constant across the full web width regardless of whether different widths of packages are being rewound at the same time.

TENSION CONTROL
LAY ON (CONTACT) ROLL ASSEMBLY

REEL HANDLING
Pneumatic Unload Boom

CE GUARDING & LASER SCANNER

MACHINE OPTIONS:
LASER CORE POSITIONING
REWIND STATIC ELIMINATORS
LAY-ON WEBCLAMPS

Rating:
État de la machine: Good

pressXchange Machine Tools